Yardworks 60-3982-0 Owner's Manual

Electric Snow Thrower60-3982-0Owner's ManualTOLL-FREE HELPLINE: 1 866 523-5218IMPORTANT:Read all safety rules and instructions carefully before u

10OPERATING INSTRUCTIONSAdjusting the Direction of Discharge (Fig. 3-4) Snow can be discharged to the left, straight ahead, or to the right of the op

11MAINTENANCEServicing Servicing should be performed by a qualified technician. Replacement parts for this Snow Thrower must be identical to the parts

12MAINTENANCEImpellor replacement1. Remove the nut from the left hand side of the impellor shaft.4. Remove the washer and the screw.7. Remove the

18. Replace the washer and the screw.washer and screw13MAINTENANCEImpellor replacement13. Place the pulley back onto the impellor shaft.16. Repl

14Fig. 8(Fig. 8) (Fig. 8)

15TROUBLESHOOTINGAdjust the height of the handle, and verify that the carriage bolts are properly seated.Tighten the knobs.Verify that the Snow Throwe

16WARRANTYFor TWO YEARS from the date of purchase within Canada, YARDWORKS CANADA will, at its option, repair or replace for the original purchaser, f

17PARTS LIST

18PARTS LISTNo Model num. Description Qty No Model num. Description Qty 1 3118099 Upper handle assembly 1 3320299-A Impeller shaft 2 3220

Specifications . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3GENERAL SAFETY RULESREAD ALL INSTRUCTIONS CAREFULLY! WARNING: Follow the safety rules closely when using the Snow Thrower. In order to

4GENERAL SAFETY RULESElectrical Information WARNING: To avoid electrical hazards, fire hazards, or damage to the tool, use proper circu

5GENERAL SAFETY RULESFOLLOW THESE RULES WHILE OPERATING THE SNOW THROWER• Walk. Do not run.• Verify that the Snow Thrower is not in contact with anyth

6GENERAL SAFETY RULES• Use only the manufacturer's original replacement parts and accessories for this Snow Thrower. The use of unauthorized part

7ASSEMBLYAssembling the Handle (Fig. 1)1. Remove any packing material that may have been inserted between the upper and lower handles for shipping

8Diagram and Location of PartsDiagram and Location of Parts (Fig. 2)UpperHandleMiddleHandleLowerHandleWheelsCoverScrewsScraperBelt CoverDischargeDirec

9OPERATING INSTRUCTIONS Using the Snow Thrower1. Start the Snow Thrower by following the Starting instructions. The depth and weight of